WHITE fusible Stabilizer 3 yard X 60” Fuse interface, LIGHTWEIGHT iron-on fabric

Description

Fantastic for stabilizing and adding weight to woven fabrics. Adheres to fabric with just an iron. One side sticks to the cloth, the other one does not. It can be used as an interface or stabilizer. No pre-shrinking necessary.
60" Tall.
100% Polyester
Best for use with light to medium-weight fabrics
Sewing machine safe
Machine wash warm. Tumble dry low or dry clean.
Nonwoven Fusible White UF653 / UF652
One side is smooth (Does not stick)
One side has little bumps (It sticks to the material) -
Compares to pellon 950f
Good for apparel
It provides structure and support in waistbands, collars, plackets, button bands, cuffs tailoring, and mending.
Daily Crafts
makes projects easier for bags, pattern making
Fusible Projects
Perfect Bonding for embroidery and crafting
Embroidery projects
Adds stabilization to your embroidery
NOTE: Never iron directly on the fusible web as it will melt all over your iron! Two pieces of fabric (Fabric, interface, fabric)can be used to prevent the fusible web from melting.
1. Cut out one piece of fusing material to fit your project
2. Put the fabric in between two pieces of fabric larger than the fusing material.
3. The side with the tiny bumps will adhere to the material while the smooth side will not.
4. Fuse fabric by using an iron set to the highest dry setting.
5. Press the iron slowly across the fabric for around 5 seconds of constant heat.
6. To fuse permanently press firmly with hot iron and steam.
7. Allow to cool Iron must be protected with a non-stick pressing cloth to avoid scorching.
Ships From Brooklyn, NY U.S.A